Structural Analysis & Design of Rotors
Angus Ramsay is editing and contributing to a book commissioned by NAFEMS on the industrial usage of FE. His chapter looks at using FE in the structural analysis & design of rotors.
Finite Element Specialists and Engineering Consultants
- Home
- Engineering Consultants
- Engineering Services
- Customers
- Software
- Knowledge Base
- Books
- Projects
- Case Studies Demonstrating Industrial Usage of Engineering Analysis & Simulation
- Equilibrium Finite Element Analysis of a Shear Wall
- Stone Landings
- Convergence & Extrapolation for Practising Engineers
- Limit Analysis
- Design against Burst of Rotating Discs
- NAFEMS Benchmark Challenge
- Stress Trajectories
- Case Studies
- Simulation Governance
- Technical Notes
- Infinite Table
- Limit Analysis of a RC Wing Wall
- EC9 - Fatigue Curves
- ANSYS: Interpretation of Edge Loads
- ANSYS: Potential Issues with Path Operations
- Stress Fields in the Standard Four-Noded Conforming Finite Element
- The Navier Solution for the SSSS Plate
- Uniformly Loaded Rectangular Plate on Three Corner Supports
- Large Thermal Strains in FEA
- The Inertial Ellipsoid
- Revision Request for ASME B&PV Code
- Accuracy of Thermal Expansion Properties in ASME B&PV Code
- ASME/ANSYS: Potential Issue with Thermal Expansion Calculations
- ANSYS: Potential Issue with Element Table Operation
- Utilisation
- Stress Linearisation for Practising Engineers
- Dimensional Analysis & Numerical Experiments for a Rotating Disc
- On the Uniqueness of Limit Analysis Solutions
- Presentations
- Efficient Design through Lower-Bound Limit Design
- Strong Equilibrium in FEA – An Alternative Paradigm?
- EFE in the Education of Engineers
- Equilibrium: Fact or Fiction
- Research & Development at Ramsay Maunder Associates
- An Equilibrium Approach to FE Modelling of Plates & Shells
- EFE as a Complementary Lower-Bound Tool
- Limit Analysis using Finite Element Techniques
- Shades of Equilibrium
- Equilibrium Finite Elements
- Equilibrium Finite Elements for the Safe Limit Analysis of Plates
- Publications
- The Case for Code Convergence
- Safe and Economical Simulation for the Built Environment
- Potential Unintended Consequences Due to a Lack of Scientific Rigour
- The Structural Engineering Technical Expert
- Strong Equilibrium in FEA - An Alternative Paradigm
- Simulation Governance for the Expert Witness
- Equilibrium Finite Elements for RC Design
- Raising your Game with Good Simulation Governance
- Yield Line Analysis of Reinforced Concrete Slabs; Is the 10% Rule Safe?
- An Error in Timoshenko's 'Theory of Plates and Shells'
- Avoiding Finite Element Malpractice through Simulation Governance
- The Influence and Modelling of Warping Restraint on Beams
- What is Equilibrium Finite Element Analysis?
- Visualisation of stress fields
- Geometric Optimisation of Yield-Line Patterns using a Direct Search Method
- Automated Yield-Line Analysis for the Limit Analysis of Plates
- Theses/Dissertations
- Corrigenda
- Book Reviews
- Glossary
- Finite Element People
- NAFEMS PSE Competencies
- Useful Figures
- News
- R & D
- Contact us
Finite Element Specialists and Engineering Consultants
