Design/Analysis of a Pair of Pulleys

Introduction

This case study describes a design-analysis project in mechanical engineering undertaken by Ramsay Maunder Associates (RMA) for the pulleys of an industrial bandsaw. The bandsaw comprises two main pre-tensioned pulleys that drive a saw band. The stresses induced in the pulleys are primarily due to centrifugal loading but also to the interference fit between the pulley and the shaft.

Author

Angus Ramsay

Useful Link:

LinkedIn Post

DOI: 10.13140/RG.2.2.20802.48327

cs3-front-page-01

Search